Rate Calls
Get lb per 1000 sq ft by pavement temperature, trend, snow left, material, and zone area. SaltLedger shows the math behind each call and flags the hard 15F dry-salt cutoff.
Android business app for commercial snow and ice contractors
SaltLedger reads pavement temperature, site zones, trend, snow condition, and material choice to calculate pounds per zone. Pro service logs add GPS, notes, photos, PDF tickets, route loads, and season packets.
Stop guessing. Stop over-salting. Build a record that supports a slip-and-fall file.
Get lb per 1000 sq ft by pavement temperature, trend, snow left, material, and zone area. SaltLedger shows the math behind each call and flags the hard 15F dry-salt cutoff.
Pro service records include GPS, timestamp, notes, material, pounds applied, photos, and PDF export for event tickets or season packets.
Plan route demand against truck capacity and identify the first site where the load runs short before the truck leaves the yard.
Track cost, chloride equivalent, dry-salt baseline, site summaries, material summaries, and monthly-by-site trends from logged work.
Free gives one-site salt calls, the full rate table, and the spread visualizer. Pro adds unlimited sites, service logs, PDF tickets, season packets, route planning, cost dashboard, and unlimited presets.
For pre-wetted or pretreated salt around 18F and falling on a plowed lot, about 2.5 lb per 1000 sq ft. SaltLedger picks the material column from your temp, trend, and snow condition.
Dry rock salt is ineffective below about 15F pavement temp because brine forms too slowly. SaltLedger flags that cutoff and suggests the safer material call.
Keep a timestamped service record with GPS, notes, photos, material, pounds applied, and the math. SaltLedger Pro stamps that record and exports PDF tickets.
Built from MPCA Smart Salting and MnDOT field rate guidance. Estimate only. Verify against current standards, your engineered snow-and-ice plan, material specs, and your AHJ before applying.