FieldOS for Paving

The field CRM for Paving crews.

Run paving jobs from the first visit to getting paid: capture the work in the field, build photo and checklist proof, send the customer a clean record, and run the operation offline. Built on the Anvilfield system, with every free paving calculator, checklist, and guide feeding in.

Open FieldOS Start with the free paving tools

Works offline. Built for the truck, the roof, and the basement, not just the office.

CaptureProveSendGet paid

How it works

One flow, from the paving field to getting paid.

Capture the paving job in the field

Log the visit, the customer, the scope, and the readings once. No clipboard, no re-typing it at the truck.

Build the proof as you work

Before-and-after photos, checklists, and sign-offs attach to the job automatically and stay organized by stop.

Send a clean record

One link sends the customer a branded proof page with the photos and the work done, so they see a professional record.

Run the whole operation

Jobs, estimates, change orders, and customer history in one place, offline, syncing when you get signal.

Start free

The free paving tools that feed FieldOS.

Every Anvilfield paving calculator, readiness check, and field guide is free and works offline. Run them today; capture the job and the proof in FieldOS when you are ready.

Aggregate base calculatorFind the tons of crushed aggregate base for a given area and compacted depth.Asphalt density calculatorTurn a mat density reading and the Gmm into % Gmm and air voids, and check it against the acceptance target before the lot cools.Asphalt tonnage calculatorEstimate the tons of hot-mix asphalt for a job from length, width, compacted thickness, and the mix unit weight, with a waste allowance.Soil swell/shrink calculatorConvert earthwork volume between bank, loose (haul), and compacted using swell and shrink: loose = bank x (1+swell), compacted = bank x (1-shrink).Trench volume calculatorFind excavation volume: length x width x depth in feet, divided by 27 for cubic yards, plus an approximate truck-load count.Asphalt paving day readinessA 2 minute check before the paver moves, so a short compaction window, a cold joint, or a segregated mat does not lock low density into the lot.Striping readiness checkA 2-minute check that catches the prep, cure, weather, layout, and record gaps that peel a lot or fail its inspection.ADA ramp and parking readinessA two-minute pass that flags the slope, count, aisle, warning, and sign gaps that get accessible work chipped out and re-poured.Density acceptance readinessA 2-minute check that catches the missing Rice test, uncorrelated gauge, or untested joint before the cores come back and settle it for you.

All paving field guides Paving calculators Paving readiness checks

Offline paving field apps

MatWindowAsphalt paving and compaction timing.Brake Stroke CardRecords air-brake pushrod stroke, chamber limits, and margin, then exports an axle proof sheet.CulvertCheckOffline FHWA HDS-5 culvert calculator giving a pass or fail headwater verdict with PDF reports.DirtBalanceOffline excavation and site-grading tool for earthwork cut and fill estimating.LotDoctorAsphalt pavement maintenance and commercial lot assessment on device.PaverFitPlans interlocking concrete paver and clay brick hardscape installs offline.

Run your next paving job through FieldOS.

Open it in your browser or on the app and capture your next visit, nothing to install to try it. The customer gets a clean, branded proof record: the before-and-after photos, the completed checklist, the work done, and the sign-off, in one link.

Open FieldOS See all of FieldOS