FieldOS for Electrical

The field CRM for Electrical crews.

Run electrical jobs from the first visit to getting paid: capture the work in the field, build photo and checklist proof, send the customer a clean record, and run the operation offline. Built on the Anvilfield system, with every free electrical calculator, checklist, and guide feeding in.

Open FieldOS Start with the free electrical tools

Works offline. Built for the truck, the roof, and the basement, not just the office.

CaptureProveSendGet paid

How it works

One flow, from the electrical field to getting paid.

Capture the electrical job in the field

Log the visit, the customer, the scope, and the readings once. No clipboard, no re-typing it at the truck.

Build the proof as you work

Before-and-after photos, checklists, and sign-offs attach to the job automatically and stay organized by stop.

Send a clean record

One link sends the customer a branded proof page with the photos and the work done, so they see a professional record.

Run the whole operation

Jobs, estimates, change orders, and customer history in one place, offline, syncing when you get signal.

Start free

The free electrical tools that feed FieldOS.

Every Anvilfield electrical calculator, readiness check, and field guide is free and works offline. Run them today; capture the job and the proof in FieldOS when you are ready.

Voltage drop calculatorSize the conductor against the run: enter the load and length, get the volts dropped and the percent against the 3 percent target.Generator sizing calculatorSize a generator from the running load plus the largest motor's starting surge, with headroom: peak = running + surge.Three-phase power calculatorFind three-phase kW and kVA from volts, amps, and power factor: kVA = sqrt(3) x V x A / 1000, and kW = kVA x PF.Bolt torque calculatorEstimate bolt torque from the target preload: T = K x D x F, where K is the nut factor.Sling load calculatorFind the tension in each sling leg: (load weight / legs) divided by the sine of the sling angle from horizontal.Energy cost calculatorFind what a load costs to run: kWh = kW x hours, times the rate per kWh, per day and per year.Electrical safety and LOTOA 2 minute check on the electrical safety practices that decide whether a worker goes home, before an arc flash or a re-energized circuit decides for you.Arc flash readinessA 2 minute check on whether your electrical safety program would actually protect a worker from an arc flash, before an incident or an OSHA inspector tests it.Cash flow readinessA 2 minute check on whether you run a WIP, bill early, and collect fast, before a profitable company runs out of cash.Contractor business healthA 2 minute check on whether your trade business is run on numbers and cash discipline, before a profitable-looking year quietly turns into a payroll you cannot make.

All electrical field guides Electrical calculators Electrical readiness checks

Offline electrical field apps

PoEHeatPoE voltage drop, bundle heat, conduit fill, and 802.3bt checks.EVFeederEV charger load, voltage drop, and feeder planning.Pull Plan CardCable pull planning and turnover card export.Storm Crew Day LogOffline storm crew timesheet, per-diem, lodging, equipment, mileage, and export records for mutual-aid foremen.Reel Remainder LogOffline cable reel balance log, pull history, partial-reel estimator, low-reel dashboard, and yard export packets.Assured Ground RouteOffline AEGCP color-route log for cord sets, temporary receptacles, tools, continuity readings, failed-item holds, and export records.

Run your next electrical job through FieldOS.

Open it in your browser or on the app and capture your next visit, nothing to install to try it. The customer gets a clean, branded proof record: the before-and-after photos, the completed checklist, the work done, and the sign-off, in one link.

Open FieldOS See all of FieldOS